Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up AdBlue and reset the warning on the Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: AdBlue warning light

In this guide we will see the information related to topping up the AdBlue fluid and resetting the warning on the Audi A4. First of all, we get on board the car and turn on the instrument panel; we will see the warning appear on the display indicating the amount of AdBlue needed to be topped up. At this point, we top up the fluid using the appropriate container or at the distributor, opening the small door and unscrewing the cap; once the topping up is done, we turn on the instrument panel and wait for the system to detect the new level of AdBlue, thus resetting the warning.

Posted on 25 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the AdBlue Warning Light on the Audi A4
Resetting the AdBlue Warning Light on the Audi A4
Audi A4 (2014-2024 / B9) This guide will show you how to reset the AdBlue refill warning light on the Audi A4. First, ensure you have actually refilled the AdBlue; then use t…
How to Reset the AdBlue Light on the Audi A4?
How to Reset the AdBlue Light on the Audi A4?
Audi A4 (2007-2016 / B8) To reset the AdBlue light on the Audi A4, open the fuel filler door located on the rear right side of the vehicle. Here, you will find the fuel cap a…
How to Top Off AdBlue in an Audi A4
How to Top Off AdBlue in an Audi A4
Audi A4 (2014-2024 / B9) The filler neck for adding AdBlue is located next to the fuel filler. To perform this operation, open the flap and remove the fuel cap. At this point…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos