Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you open the fuel tank cap of the Audi A4?

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part: Fuel cap

See other generations:
Video tutorial

Let's discover how to open the fuel tank cap of our Audi A4, a not at all difficult operation, following the video instructions of this video guide. In order to access the aforementioned cap, we must first open the flap, by doing a very simple thing, pressing the button with the symbol of the fuel pump on it, located under the driver's side door armrest.

Once pressed, we will push the flap mentioned earlier slightly and then pull it towards us. Once we reach the cap, all we have to do is unscrew it.


Posted on 8 November 2025 by ScegliAuto


Related tutorials

How to Open the Fuel Door and Cap on Audi A4
How to Open the Fuel Door and Cap on Audi A4
Audi A4 (2004-2008 / B7) In this brief guide, you will find instructions to open the fuel door and cap on the Audi A4. First, unlock the door locks using the remote. Then, pr…
How to Reset the AdBlue Warning Light on the Audi A4?
How to Reset the AdBlue Warning Light on the Audi A4?
Audi A4 (2014-2024 / B9) To reset the AdBlue warning light on the Audi A4, you need to refill the additive fluid by pouring it into the designated tank. After obtaining a flu…
How to Top Off AdBlue in an Audi A4
How to Top Off AdBlue in an Audi A4
Audi A4 (2014-2024 / B9) The filler neck for adding AdBlue is located next to the fuel filler. To perform this operation, open the flap and remove the fuel cap. At this point…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos