Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on an Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Warning light – error code

To reset the Oil Change light on an Audi A3, turn on the ignition by pressing the appropriate button: this will allow you to access the menu on the central display of the instrument cluster. Navigate to the "Vehicle Information" option: the next option to select will be "Service Intervals". A further screen will open, where you will find the "Reset Oil Change Interval" option: selecting this and confirming with "Yes" will make the Oil Change light disappear from the car's instrument cluster.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a 2016 Audi A3
How to reset the service light on a 2016 Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today we will explain how to reset the 2016 Audi A3 on your own. To reset the warning light, we turn on the instrument panel and the onboard computer…
Reset Navigation System Audi A3
Reset Navigation System Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this video tutorial, you will learn how to reset the navigation system / onboard computer of an Audi A3, as well as other models from the manufact…
How to reset the MMI of an Audi A3
How to reset the MMI of an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) When the navigation system of the Audi A3 freezes irreparably, it is necessary to reset the system. To proceed with the reset, we must press and hold…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos