Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat of the Audi A4 B8

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Seat

See other generations:
Video tutorial

To remove the front seat of the Audi A4, push the seat all the way back to detach the plastic covers in front of the tracks. Under these covers, you will find the screws that secure the seat, which need to be removed.

Repeat this process by pushing the seat forward and loosening the screws at the back. At this point, disconnect the connectors located at the bottom of the seat so that it can be pulled out from the cabin and replaced with a new one.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Remove the Front Seat of an Audi A4?
How to Remove the Front Seat of an Audi A4?
Audi A4 (2000-2004 / B6) To remove the front seat of the Audi A4, loosen the bolts that secure the tracks on which the seat can slide, located at the front and rear. Once all…
How to Remove the Front Seat of the Audi A4 B5
How to Remove the Front Seat of the Audi A4 B5
Audi A4 (1994-2000 / B5) This guide shows how to remove the front seats of the Audi A4 B5. After pulling the seat forward, from the passenger side, remove the screw at the en…
How to Remove the Front Seat from an Audi A4
How to Remove the Front Seat from an Audi A4
Audi A4 (2007-2016 / B8) Here are the instructions to remove and replace the front seat of an Audi A4. First, open the front door of the vehicle and start unscrewing all the …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos