Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Bulbs in an Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: Interior dome light bulb

Replacing the dome light bulbs in an Audi A4, as shown in this tutorial, is a very simple task. To do this, you will need a Torx T20 screwdriver and a plastic trim tool. For the front dome light, open the small front glove compartment and remove the two screws located underneath it, then pry it out using the trim tool along the entire perimeter. Once removed, take out the burnt bulb by turning it counterclockwise. The procedure is essentially the same for the rear dome light; however, in this case, you will also need to remove the clear lens.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light Bulbs in an Audi A4?
How to Replace the Interior Light Bulbs in an Audi A4?
Audi A4 (2000-2004 / B6) To replace the interior light bulbs in an Audi A4, use a tool to pry the light assembly from its housing. Once removed, disconnect the connectors and…
How to replace the internal rearview mirror of the Audi A4
How to replace the internal rearview mirror of the Audi A4
Audi A4 (2007-2016 / B8) Today we will see the steps that will allow us to disassemble and replace the internal rearview mirror of the Audi A4, following the instructions bel…
How to Replace the Headlight Bulb on an Audi A4 B7
How to Replace the Headlight Bulb on an Audi A4 B7
Audi A4 (2004-2008 / B7) This guide shows how to replace the headlight bulbs on an Audi A4 B7. After securing the vehicle and opening the hood, move to the back of the headli…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos