Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the car radio in an Audi TT?

Model: Audi Tt 8J, MK 2 - Years 2006-2014
Part: Car stereo

To change the car radio of the Audi TT, we need to get the appropriate keys designed for this purpose and sold in a set of 4. Once we have them, we can insert them into the four slots on the radio in the exact way indicated in the video. Make sure they are securely fixed to the radio and then pull them outwards. This way we can remove the radio from its housing and disconnect the electrical connectors. At this point, all we have to do is attach the same connectors to the new radio and insert it in place of the old one, without using the keys.

Posted on 6 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the car radio from the Audi TT?
How do you remove the car radio from the Audi TT?
Audi Tt (1998-2006 / 8N, MK 1) To be able to remove the car radio from the Audi TT you will need to use the special keys that are provided when you buy the car. These keys must be …
How to Change the Engine Air Filter on an Audi TT
How to Change the Engine Air Filter on an Audi TT
Audi Tt (1998-2006 / 8N, MK 1) Let's see how to change the engine air filter on an Audi TT. Open the car door, pull up the hood release lever located at the bottom left of the dash…
How do you replace the rear light on the Audi TT?
How do you replace the rear light on the Audi TT?
Audi Tt (1998-2006 / 8N, MK 1) In order to replace the rear light of the Audi TT it is necessary to open the tailgate of the luggage compartment and go to unscrew the knob located …

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos