Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Air Filter on an Audi TT

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Air filter

Let's see how to change the engine air filter on an Audi TT. Open the car door, pull up the hood release lever located at the bottom left of the dashboard, and lift the hood. Secure it with the prop rod. Remove the plastic cover (as shown in the video); open the airbox (unscrew the securing screws), remove the cover of the filter box, and take out the worn air filter. Insert a new filter into the designated housing (making sure it fits snugly against the walls). Finally, reattach the airbox cover and the plastic cover. Close the hood after the replacement.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Audi TT 3
How to replace the cabin air filter of the Audi TT 3
Audi Tt (2014-2023 / MK 3, 8S) If it's time to replace the cabin air filter of your third generation Audi TT, all you have to do is follow the procedure described below. First of a…
How to Replace the Windshield Wiper Motor on an Audi TT?
How to Replace the Windshield Wiper Motor on an Audi TT?
Audi Tt (1998-2006 / 8N, MK 1) To replace the windshield wiper motor on an Audi TT, first loosen the bolts securing the wiper arms and remove them. Next, you need to remove the gas…
How to Open the Gas Cap on an Audi TT
How to Open the Gas Cap on an Audi TT
Audi Tt (1998-2006 / 8N, MK 1) Unlock the fuel door on the Audi TT if you cannot open it. First, open and lift the trunk using the appropriate key or button. Remove the plastic cov…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos