Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Position Bulbs on the Audi TT?

Model: Audi Tt MK 2, 8J - Years 2006-2014
Part: Headlight bulb

In this video tutorial, you will learn how to remove and replace the front position bulbs on the Audi TT headlight by following these simple steps. First, open the hood of your car and start by removing the plastic cover above the headlight by unscrewing the screw; then disconnect the electrical connector of the bulbs found behind the headlight and unscrew the mounting screws to remove the optical assembly, as shown in the video. Now proceed with replacing the position bulbs, also replacing the low beam bulb if necessary!

Updated on 17 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the parking light bulbs in the Audi TT?
How to replace the parking light bulbs in the Audi TT?
Audi Tt (2006-2014 / MK 2, 8J) In this tutorial we can see how to replace the position lights bulbs in the Audi TT, a very simple operation. First of all, make sure that the key is…
Replacement of the headlight bulb of the Audi TT.
Replacement of the headlight bulb of the Audi TT.
Audi Tt (2006-2014 / MK 2, 8J) Let's discover the information that will allow us to disassemble and replace the headlight bulb of the Audi TT. First of all, we open the hood of the…
How to Replace the Reverse Light Bulbs in an Audi TT?
How to Replace the Reverse Light Bulbs in an Audi TT?
Audi Tt (1998-2006 / 8N, MK 1) In this tutorial, you will see how to replace the reverse light bulbs in an Audi TT, a very simple and quick operation. First, ensure the key is not …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos