Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Audi TT?

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Headlight bulb

In this tutorial we can see how to replace the front headlight bulbs in the Audi TT, a very simple and quick operation. First of all, make sure that the key is not inserted, in order to operate safely, then open the hood, locate the large cap located on the back of the headlight in question and remove it. Subsequently disconnect the power connector, unlock the fixing clip by rotating it counterclockwise and remove the old bulb from the housing. At this point, all that remains is to insert the replacement and reassemble everything.

Posted on 1 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Position Bulbs on the Audi TT?
Audi Tt (2006-2014 / MK 2, 8J) In this video tutorial, you will learn how to remove and replace the front position bulbs on the Audi TT headlight by following these simple steps. F…
How to replace the rear headlight bulbs in the Audi TT?
How to replace the rear headlight bulbs in the Audi TT?
Audi Tt (1998-2006 / 8N, MK 1) In this tutorial we can see how to replace the rear light bulbs in the Audi TT, an extremely simple and quick operation. First of all, make sure that…
Replacing the Rear Headlight Bulbs on an Audi TT
Replacing the Rear Headlight Bulbs on an Audi TT
Audi Tt (1998-2006 / 8N, MK 1) Follow these instructions to remove and replace the rear headlight bulbs on an Audi TT in simple steps. First, open the trunk and start removing the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos