Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the parking light bulbs in the Audi TT?

Model: Audi Tt MK 2, 8J - Years 2006-2014
Part: Headlight bulb

In this tutorial we can see how to replace the position lights bulbs in the Audi TT, a very simple operation. First of all, make sure that the key is not inserted, then open the hood and, using a screwdriver with a flat tip, unhook the plastic covers of the grille. Unscrew the indicated fixing screws, grab the headlight and separate it from the bodywork. At this point we can open the bottom cap, disconnect the old bulb and connect the replacement without touching the glass directly with bare hands.

Posted on 10 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Position Bulbs on the Audi TT?
Audi Tt (2006-2014 / MK 2, 8J) In this video tutorial, you will learn how to remove and replace the front position bulbs on the Audi TT headlight by following these simple steps. F…
Replacing the Rear Headlight Bulbs on an Audi TT
Replacing the Rear Headlight Bulbs on an Audi TT
Audi Tt (1998-2006 / 8N, MK 1) Follow these instructions to remove and replace the rear headlight bulbs on an Audi TT in simple steps. First, open the trunk and start removing the …
How to Replace the Reverse Light Bulbs in an Audi TT?
How to Replace the Reverse Light Bulbs in an Audi TT?
Audi Tt (1998-2006 / 8N, MK 1) In this tutorial, you will see how to replace the reverse light bulbs in an Audi TT, a very simple and quick operation. First, ensure the key is not …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos