Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight on an Audi A4

Model: Audi A4 B7 - Years 2004-2008
Part: Headlight

To remove the front headlight on an Audi A4, open the hood to access the screws securing the headlight from the top. Loosen these screws to proceed with loosening the additional screws that secure the headlight assembly in its housing. Once all the fasteners are loosened, you can pull the headlight out of its housing, disconnecting the connectors at the back. At this point, you can connect the new headlight assembly and secure it with the appropriate screws.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight of an Audi A4?
How to Remove the Front Headlight of an Audi A4?
Audi A4 (2004-2008 / B7) Before starting, open the hood of your Audi A4. Begin by removing the screws that secure the front headlight to the vehicle using a Torx screwdriver.…
How to Remove the Front Headlight of an Audi A4
How to Remove the Front Headlight of an Audi A4
Audi A4 (2004-2008 / B7) Before you can begin, open the hood of your Audi A4. Start by removing the screws that secure the front headlight to the vehicle using a Torx screwdr…
How do you remove the front headlight of the Audi A4?
How do you remove the front headlight of the Audi A4?
Audi A4 (2007-2016 / B8) In order to remove the front headlight of the Audi A4, you need to open the hood so that you can access the components located in the front part of t…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos