Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Glove Compartment

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Glove compartment

See other generations:
Video tutorial

To replace the glove compartment in your car, first empty it completely. Then, locate and unscrew the four Torx screws, two at the top and two at the bottom.

Once done, you can pull out the drawer, being careful to disconnect the light once the drawer is removed, just enough to maneuver the bulb. Locate and remove the air duct.

After that, find and remove the cabin filter cover by detaching the five metal clips that hold it in place, extracting the filter and paying attention to the orientation in which it is installed.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Audi A4 (2004-2008 / B7) To remove the original car radio, you need the appropriate extraction keys: insert the keys into the slots on the sides of the radio with the notches…
Removing the Audi A4 Radio Display
Removing the Audi A4 Radio Display
Audi A4 (2007-2016 / B8) Today, let's go through the instructions to remove and replace the radio display of the Audi A4 in simple and quick steps. First, get inside the vehi…
Installing iPhone, iPod, and AUX in Your Car Radio
Installing iPhone, iPod, and AUX in Your Car Radio
Audi A4 (2000-2004 / B6) Connecting some devices to your car radio depends on how old and equipped it is. You can connect these devices to the car radio via the AUX input, as…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos