Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rocker Panel Trim

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Body

To remove the rocker panel trim, lift the vehicle on appropriate automotive jack stands or, better yet, on a lift, and remove the wheels. Then, locate the fastening screws along the lower edge of the rocker panel and clean the heads from dirt to allow for proper insertion of the appropriate wrench. Next, unscrew the screws along the lower edge and those inside the fender wells. Open the door and remove the threshold trim to access the other fastening screws of the rocker panel. Once these are removed, you can take off the rocker panel.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing Front Headlight
Instructions for Removing Front Headlight
Audi Tt (1998-2006 / 8N, MK 1) To remove the front headlight, you must also remove the front bumper. It is advisable to lift the vehicle on appropriate jack stands and remove the f…
Instructions for Replacing Rear Shocks
Instructions for Replacing Rear Shocks
Audi Tt (1998-2006 / 8N, MK 1) Removing the rear shock absorber is extremely easy since it is done entirely from the wheel well, and you do not need to access the trunk or remove a…
Instructions for Removing Door Panel
Instructions for Removing Door Panel
Audi Tt (1998-2006 / 8N, MK 1) Removing the door panel on the car model in question is very simple because it has only one mounting screw; start by removing the cap located at the …

Replace the Battery in a Toyota Auris Key Fob

How to replace the battery in a Toyota Auris key fob? Follow these steps. Take your key fob and slide the button to release the metal key. Once extracted, use the key or a screwdriver to pry open the key cover. Pry until the two pieces separate, then use a screwdriver to remove the battery and replace it with a new one of the same size and voltage. Refit the cover onto the key fob until you hear it click into place. Finally, insert the metal key back into the key fob. Check the proper functioning of the key fob.

Watch the video!


by ScegliAuto

More videos