Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Side Mirror on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Side mirror

To perform this operation, it is advisable to disconnect the battery cables to protect any delicate circuits, such as the one controlling the mirror adjustment motor. Now, proceed to remove the triangular panel covering the bolts securing the mirror. To do this, unscrew the bolt located in the designated hole, then disconnect the connector supplying the motor. After that, unscrew the bolts to detach the mirror and remove it from the exterior. Reverse the steps described for reassembly.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror of a Ford Mondeo
How to Replace the External Wing Mirror of a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) For this task, it is advisable to disconnect the battery cables to protect any sensitive circuits, such as the one controlling the motor for the mirr…
How to Remove the Side Mirror from a Ford Mondeo
How to Remove the Side Mirror from a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) For this procedure, it is advisable to disconnect the battery cables to protect any sensitive circuits, such as the one controlling the mirror adjust…
How to Replace the Diesel Filter of the Ford Mondeo TDCI
How to Replace the Diesel Filter of the Ford Mondeo TDCI
Ford Mondeo / Fusion (2000-2007 / MK 2) Today's guide will show you how to dismantle and replace the diesel filter of the Ford Mondeo TDCI, following the instructions below. First, open the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos