Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror of a Ford Mondeo

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Side mirror

See other generations:
Video tutorial

For this task, it is advisable to disconnect the battery cables to protect any sensitive circuits, such as the one controlling the motor for the mirror movements. You can now proceed to remove the triangular panel covering the bolts that secure the mirror.

To do this, unscrew the bolt located in the designated hole. Then, disconnect the connector that powers the motor and subsequently unscrew the bolts to detach the mirror and extract it from the exterior.

Retrace the steps described for refitting.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of a Ford Mondeo
Where to Find the Fuse Box of a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) In this short video tutorial, locate the three fuse boxes of a Ford Mondeo third generation, produced from 2010 to 2014, along with all the relevant …
How to Replace the Handbrake Cable on a Ford Mondeo?
How to Replace the Handbrake Cable on a Ford Mondeo?
Ford Mondeo / Fusion (2000-2007 / MK 2) To replace the handbrake cable on a Ford Mondeo, lift the car with a jack or ramp to access the bolts securing the right rear wheel. Once this wheel …
How to Change the Automatic Gearbox Oil on a Ford Mondeo?
How to Change the Automatic Gearbox Oil on a Ford Mondeo?
Ford Mondeo / Fusion (2007-2014 / MK 3) To change the automatic gearbox oil on a Ford Mondeo, lift the car with a jack or ramp to access the underside of the engine bay. Here, locate the pr…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos