Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Automatic Gearbox Oil on a Ford Mondeo?

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Transmission fluid

To change the automatic gearbox oil on a Ford Mondeo, lift the car with a jack or ramp to access the underside of the engine bay. Here, locate the protective panel of the gearbox, which must be removed by loosening its screws. At this point, loosen the drain plug of the reservoir containing the gearbox oil, collecting all the used oil in a suitably positioned container. Now, top up by inserting the new oil through the same breather.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Mondeo / Fusion (2007-2014 / MK 3) How do you replace the oil filter on a Ford Mondeo? Open and lift the front bonnet to access the oil filter. Using a socket spanner, unscrew the larg…
Ford Mondeo / Fusion (2007-2014 / MK 3) This video shows the fuse diagrams for a Ford Mondeo MK-3. The first diagram relates to the fuse box located in the engine compartment; this box has …
Ford Mondeo / Fusion (2007-2014 / MK 3) Replacing the oil filter and engine oil on a Ford Mondeo mk3 model vehicle is a fully achievable operation independently. To carry out this operation…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos