Do it yourself
Frequently asked questions about cars and motorcycles

Gear Oil Change on Ford Mondeo 1.8 TDCi

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Transmission

See other generations:
Video tutorial

To change the gearbox oil, proceed as follows: remove the air filter, battery, and battery tray. Locate the oil fill plug at the bottom and unscrew it using a socket wrench.

To remove the oil drain plug, it is advisable to remove the left front wheel and brake disc. Locate the drain plug and, using a socket wrench, unscrew it, ensuring you have a container on the floor to collect the used oil. Wait for all the oil to drain out, then refit the drain plug.

Obtain the new oil containers, ensuring to use a lubricant that meets the specifications for your car model. Using a funnel, pour the new lubricant into the reservoir, then screw the fill plug back on.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

Ford Mondeo / Fusion (2014-2021 / MK 4) Today, we will go through the steps to remove and replace the timing belt on a Ford Mondeo 2.0 TDCi. First, open the vehicle's bonnet and begin remov…
Ford Mondeo / Fusion (2014-2021 / MK 4) Today's main instructions will allow us to remove and replace the timing belt on the Ford Mondeo 2.0 TDCi. First, lift the vehicle and begin by disco…
Ford Mondeo / Fusion (2014-2021 / MK 4) Today, we will go through the main instructions for removing and replacing the timing belt on a Ford Mondeo 2.0 TDCi. First, open the bonnet and star…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos