Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Timing belt

See other generations:
Video tutorial

To perform this simple operation, first lift the bonnet. Then, remove the upper engine cover and the plastic side cover that protects the timing belt.

To create more space for the job, you can remove components next to the engine, such as the coolant reservoir, the windscreen washer pipe, and the fuel filter. This will allow you to remove the lower engine cover and the right wheel for better access to the area where you will be working.

Now, relieve the tension from the tensioner pulley and remove the belt for replacement.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below we will discover information on how to disassemble and replace the timing belt of the Volkswagen Golf 1.6 TDI; the manufacturer states that, on…
Guide to Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Guide to Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's main information will show you how and when to replace the timing belt on a Volkswagen Golf 1.4 TSI. For this type of engine, the timing belt…
How to Replace the Timing Belt on a Volkswagen Golf 1.4L
How to Replace the Timing Belt on a Volkswagen Golf 1.4L
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Here are the instructions on how to remove and replace the timing belt on a Volkswagen Golf 1.4 petrol, following these simple steps. First, lift the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos