Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Volkswagen Golf 1.4L

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Timing belt

Here are the instructions on how to remove and replace the timing belt on a Volkswagen Golf 1.4 petrol, following these simple steps. First, lift the vehicle and start by removing the front right wheel, then also remove the wheel arch liner; next, remove the alternator belt and take off the crankshaft pulley. Now remove the timing cover to access the timing belt, which should generally be replaced every 50,000 miles; then install the new original timing belt, following the video tutorial to the end!

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Guide to Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today's main information will show you how and when to replace the timing belt on a Volkswagen Golf 1.4 TSI. For this type of engine, the timing belt…
Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below we will discover information on how to disassemble and replace the timing belt of the Volkswagen Golf 1.6 TDI; the manufacturer states that, on…
Guide to Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.8T
Guide to Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.8T
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today's guide will show you the main steps on how to remove and replace the water pump and timing belt on the Volkswagen Golf 1.8T. For simplicity an…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos