Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Audi R8 key.

Model: Audi R8 Type42 - Years 2006-2015
Part: Key

In the following guide dedicated to all of you who own an Audi R8, we will discover how to replace the battery located inside the remote control. First, locate the small button on the top of the back cover and hold it down to easily remove the emergency physical key. Once you have done this, also remove the battery holder and proceed with replacing the old button battery with a new one (CR 2032 model). Finally, reassemble the various components correctly and you have completed the procedure.

Posted on 8 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Audi R8 key.
How to replace the battery of the Audi R8 key.
Audi R8 (2006-2015 / Type42) Thanks to the following guide, you will finally be able to correctly replace the button battery located inside the key of your Audi R8. First of all,…
How do you replace the battery of the Audi R8 remote control?
How do you replace the battery of the Audi R8 remote control?
Audi R8 (2006-2015 / Type42) In order to replace the battery of the Audi R8 remote control, you need to press the button located on the top of the device so that the key inserted…
How do you replace the battery of the Audi R8 remote control?
How do you replace the battery of the Audi R8 remote control?
Audi R8 (2006-2015 / Type42) In order to replace the battery of the Audi R8 remote control, you need to pry with an object on the bottom of the device, so that you can detach the…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos