Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the AdBlue light in the Audi A6?

Model: Audi A6 MK 5, C8 - Years 2018-2026
Part: AdBlue warning light

If the AdBlue light has turned on in the dashboard of our Audi A6, it means that the pollution liquid has reached a too low level and, consequently, it will need to be refilled. It is a very simple and quick operation, let's see how to proceed in this tutorial. First of all, we buy a can of urea at an auto parts store, then make sure that the vehicle is turned off and open the fuel door. Once we have done this, we unscrew the small blue cap indicated, insert the can's tube into the hole and pour in the required amount of liquid. Finally, we drive a few kilometers.

Posted on 13 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the AdBlue light of the Audi A6?
How do you reset the AdBlue light of the Audi A6?
Audi A6 (2011-2018 / MK 4, C7) When the AdBlue warning light appears on the instrument panel of the Audi A6, it means that the amount of additional fluid in the system is not suffi…
How do you reset the AdBlue light on the Audi A6?
How do you reset the AdBlue light on the Audi A6?
Audi A6 (2018-2026 / MK 5, C8) To make the AdBlue warning light of the Audi A6 disappear from the instrument panel, it will be necessary to top up: to do this, you will need to pou…
How to reset the AdBlue top-up warning light on the Audi A6 3.0 TDI
How to reset the AdBlue top-up warning light on the Audi A6 3.0 TDI
Audi A6 (2011-2018 / MK 4, C7) Today we will discover the steps that will allow us to reset the AdBlue fluid top-up indicator on the Audi A6 3.0 TDI. First of all, we get on board …

    Frequently Asked Questions

    • A6 2018-2026 - Could AdBlue cause problems in the Audi A6? Read answer

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos