Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A6
    4. : How to disassemble the lock module of the Audi A6.

Audi A6 - Video tutorial

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Lock
Operation: How to disassemble the lock module of the Audi A6.

Below we will see the main instructions that will allow us to disassemble and replace the lock module of the Audi A6. First, we open the front door and start disassembling and removing the door panel, unscrewing all the fixing screws and disconnecting the electrical connector of the window lifter switch. Once the door panel is removed, we can unscrew the fixing screws of the lock module, disconnecting the electrical connector of the actuator to remove it from the door. At this point, we replace and install the new lock module, applying the reverse procedure!


Posted on 14 June 2023 by ScegliAuto

    Frequently Asked Questions

    • A6 2011-2018 - Why doesn't the fuel filler flap of the Audi A6 open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos