Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Washer Nozzles on the Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Windshield wipers

Replacing the washer nozzles on the Audi A4 B8 is really easy and quick. Let's see how to do it with the help of our video. First, get a flathead screwdriver, open the hood, and use the screwdriver to pry up the base of the nozzles located in the hood. Remove them from their seat and disconnect the electrical connector, using the screwdriver gently. Be careful because there is a right (R) and left (L) nozzle, so they need to be reinstalled in the correct orientation. To reinstall them, place the electrical connector and the lock back in position, then reposition them in their housing. Job done.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wiper on the Audi A4 Avant?
Audi A4 (2004-2008 / B7) Replacing the rear wiper on the Audi A4 B7 Avant is an extremely simple and quick operation. As shown in the attached video tutorial, no special tool…
How to Replace the Rear Windshield Wiper Blade on an Audi A4
How to Replace the Rear Windshield Wiper Blade on an Audi A4
Audi A4 (2007-2016 / B8) Before you begin, exit your Audi A4 and head to the rear hatch. Start by lifting the entire wiper arm, which will also raise the blade you need to re…
Replacing Windshield Wiper Blades on Audi A4 Avant
Replacing Windshield Wiper Blades on Audi A4 Avant
Audi A4 (2004-2008 / B7) In this video, you will learn how to replace the front windshield wiper blades on the Audi A4 Avant B8. First, lift the old wiper blades. Depending o…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos