Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the bulbs of the rear ceiling light in an Audi A4 B8.

Model: Audi A4 B8 - Years 2007-2016
Part: Interior dome light bulb

In this video tutorial, we can see how it is possible to replace the bulbs of the rear ceiling light inside the cabin in an Audi A4 B8, following a few simple steps: the first thing to do is to purchase the bulbs from an authorized dealer or they can also be purchased online. Materials needed: a lever tool. Get into the rear seat of the car, lever on one side of the ceiling light to remove it from its housing, once the plastic is removed, both bulbs need to be removed and then install the new bulbs; before putting the plastic back on the ceiling light, press the light switch button to check if they are functioning correctly. After ensuring proper functioning, reposition the plastic back onto the ceiling light.

Posted on 23 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the ceiling light bulbs of an Audi A4
How to replace the ceiling light bulbs of an Audi A4
Audi A4 (2014-2024 / B9) Let's see in this video how to replace the ceiling light bulbs of an Audi A4. With a screwdriver we pry between the ceiling light and its frame (with…
How to disassemble the interior light fixture of the Audi A4
How to disassemble the interior light fixture of the Audi A4
Audi A4 (2004-2008 / B7) This short and simple guide will show us the process of disassembling and replacing the ceiling light fixture and its bulbs in the Audi A4. First, we…
How to Remove the Dome Light on an Audi A4
How to Remove the Dome Light on an Audi A4
Audi A4 (2007-2016 / B8) Let's see how to remove and replace the bulbs in the dome light of the headliner on an Audi A4: Use a screwdriver or plastic trim tool to pry between…

How to Remove the Fuel Pump on Toyota Verso

Let's see how to remove the fuel pump on a Toyota Verso. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; unscrew the securing screws of the metal cap and remove it. Wrap the entire perimeter of the metal panel with paper or an absorbent cloth, then, using a screwdriver and hammer, unscrew the large bolt around the pump. Disconnect the power terminals and the fluid circulation tubes. Extract the fuel pump. To reassemble, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos