Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the interior lights of the Audi A6

Model: Audi A6 MK 4, C7 - Years 2011-2018
Part: Interior dome light bulb

Today in this guide, we will see the instructions that will allow us to dismantle and replace the interior lights of the Audi A6. First of all, let's get inside the car and start by removing the sun visor lights, levering them on the sides; we remove and replace the small bulb, as shown in the video. At this point, we dismantle the main light fixture, disconnecting the electrical connector; we remove and replace the bulbs in the same way, using the right type and having the same fitting; then we will proceed to replace all the other lights, including the rear ones!

Posted on 5 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to find the fuse diagram of an Audi A6
How to find the fuse diagram of an Audi A6
Audi A6 (2018-2026 / MK 5, C8) In the selected video, you can observe the fuse diagram present in an Audi A6 car. The first two fuse panels are located inside the vehicle's cabin a…
How to replace the interior light bulb on the Audi A6?
How to replace the interior light bulb on the Audi A6?
Audi A6 (2004-2012 / C6, MK 3) To be able to replace the interior light bulbs of the Audi A6, you need to open the glove box located above the interior rear-view mirror. In this wa…
How to replace the bulb of the rear interior light of the Audi A6
How to replace the bulb of the rear interior light of the Audi A6
Audi A6 (2004-2012 / C6, MK 3) In this short guide, we will see the instructions that will allow us to disassemble and replace the bulb of the rear interior light of the Audi A6. F…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos