Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Audi A4?

Model: Audi A4 B7 - Years 2004-2008
Part: Service warning light

The reset of the service indicator for the Audi A4, 2007 model, is a very simple operation that is performed after all the actions related to the mandatory service have been carried out at the workshop. The first thing to do is to press the button located to the right of the odometer for about 5 seconds; the button is easily recognizable as it has the symbol of a wrench drawn on it. The second thing to do is to wait for all the indicators on the dashboard to flash and then press the button next to the previously pressed button. Finally, wait for the indicators on the dashboard to turn off and turn on the dashboard.

Posted on 6 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" indicator on an Audi A4?
How to reset the "Service" indicator on an Audi A4?
Audi A4 (2004-2008 / B7) Good morning, today we will focus on the important procedure of resetting the "Service" light on our Audi A4. Before proceeding, make sure you have p…
How to reset the service light on the Audi A4
How to reset the service light on the Audi A4
Audi A4 (2000-2004 / B6) The service light shows the symbol of a wrench and lights up on the instrument panel display when it is necessary to carry out a car service. Mainten…
How to Reset the Service Light on an Audi A4
How to Reset the Service Light on an Audi A4
Audi A4 (2000-2004 / B6) How to reset the service light on an Audi A4. This operation is very simple. Enter the vehicle, turn on the ignition, and check that the light is on.…

How to Replace the Engine Air Filter on a Peugeot Partner

The engine air filter for this car model is located at the rear of the engine bay, directly under the windscreen, in a central position: to access the filter housing, first remove the brake fluid reservoir; then you can unscrew the three front screws that secure the filter container cover, release the side latch, and complete the removal of the cover; then extract the old filter, remove any dirt residue, ensuring no impurities enter the intake, install the new filter ensuring the seal fits perfectly against the edges of the box, and refit the cover and brake fluid reservoir.

Watch the video!


by ScegliAuto

More videos