Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure sensor on an Audi A8?

Model: Audi A8 Typ4n, MK 4 - Years 2019-2026
Part:

To reset the tire pressure sensor of a latest generation Audi A8, model produced from 2019 onwards, we must first verify the correct pressure of each individual tire as indicated by the manufacturer. Once this is done, we can proceed with resetting the pressure warning light. Let's see the procedure. First, we turn on the vehicle's ignition without starting the engine. Then, using the central display, we select the following options: "vehicle", "settings and services", and "tire pressure monitor". In the last option, we select "reset" and finally confirm the operation to complete the reset.

Posted on 9 September 2023 by ScegliAuto

Video tutorial

Related tutorials

Resetting tire pressure on Audi A8.
Resetting tire pressure on Audi A8.
Audi A8 (2009-2017 / MK 3, D4, 4H) In this guide, we will see how to reset the tire pressure on an Audi A8, model D4. Before performing this procedure, it is important to check the cor…
Tire pressure reset on an Audi A8
Tire pressure reset on an Audi A8
Audi A8 (2019-2026 / Typ4n, MK 4) In today's video, we can see how to reset the tire pressure warning light on an Audi A8, the latest generation model produced from 2019 onwards. Let'…
Tire pressure control reset on an Audi A8
Tire pressure control reset on an Audi A8
Audi A8 (2009-2017 / MK 3, D4, 4H) Through this very short video guide, we can see how to reset the tire pressure on an Audi A8 (2009-2017). Let's start by turning on the car's dashboa…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos