Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the fuse box in an Audi A6.

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Fuse box

In this tutorial, we will see the location of the fuse boxes in a third-generation Audi A6. The first fuse box is located on the left end of the dashboard, where the door rests when closed. To access it, we must first remove the plastic panel as shown in the video. The relay box is positioned under the dashboard on the left side of the steering wheel. The second fuse box is located on the right end of the dashboard behind a panel that needs to be removed, similar to the previous one. Lastly, the third and final fuse box can be found inside the trunk on the right side, also behind a panel that needs to be removed.

Posted on 15 September 2023 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram of the Audi A6?
What is the fuse diagram of the Audi A6?
Audi A6 (1997-2004 / C5, MK 2) In this video, we can see the fuse diagrams of the Audi A6 and the location of their respective boxes, to consult in case we want to check the status…
Fuse diagram of an Audi A6
Fuse diagram of an Audi A6
Audi A6 (2011-2018 / MK 4, C7) We can see through this very short video tutorial all the diagrams of the three fuse boxes inside an Audi A6, fourth generation model produced from 2…
Where is and how to reach the fuse box of an Audi A6?
Audi A6 (2004-2012 / MK 3, C6) Good morning, today we are here to understand how to locate and access the fuse box of our Audi A6. To begin, let's carefully open the front hood usi…

Other guides you may be interested in

    Frequently Asked Questions

    • A6 1994-1997 - Where is the relay of the four arrows of the Audi A6? Read answer

How to Remove the Front Bumper on a Renault Clio

Want to remove the front bumper on a Renault Clio? Let's see how to proceed with the disassembly in the video: open the bonnet by pulling the bonnet release lever and secure it. Unscrew the fastening pins of the upper cover of the front bumper using a socket wrench. Unscrew the screws on the front bumper, unscrew the screws under the splash guard and under the bumper. Remove the bumper from the body of the vehicle, unscrew the pins located at the side of the headlight (if you need to replace it). Fit the new bumper with the associated pins onto the vehicle, following the steps taken during disassembly.

Watch the video!


by ScegliAuto

More videos