Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the steering wheel of the Audi R8 Spyder

Model: Audi R8 Spyder Type4s - Years 2015-2024
Part: Steering wheel

The instructions provided in this guide will show us the procedure for disassembling and replacing the steering wheel of the Audi R8 Spyder. First, it is necessary to disconnect the battery to avoid any short circuits; then we proceed with the removal of the steering wheel airbag, pressing on the rear holes to release it and remove it (disconnecting the electrical connector), as shown in the video. At this point, we unscrew the central screw of the steering wheel, moving away the various wiring to remove the steering wheel; we replace it with the new one and finally reassemble the airbag, following the video tutorial until the end!

Posted on 4 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Start the Engine of a 2012 Audi R8 Spyder
How to Start the Engine of a 2012 Audi R8 Spyder
Audi R8 Spyder (2015-2024 / Type4s) The following video shows how to start the engine and drive your 2012 Audi R8 Spyder. To start the car, insert the key into the ignition, release the…
How to Open the Engine Compartment of the Audi R8 Spyder
How to Open the Engine Compartment of the Audi R8 Spyder
Audi R8 Spyder (2015-2024 / Type4s) Let’s see how to open the engine compartment of the Audi R8 Spyder, as the opening mechanism is somewhat hidden: sit in the driver's seat; at the bot…
How to manually close the roof of an Audi R8 Spyder.
How to manually close the roof of an Audi R8 Spyder.
Audi R8 Spyder (2015-2024 / Type4s) The manual closing procedure for the roof of an Audi R8 Spyder is very complex and always requires two people. It should only be done in case of a hy…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos