Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Start the Engine of a 2012 Audi R8 Spyder

Model: Audi R8 Spyder Type4s - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

Video tutorial

The following video shows how to start the engine and drive your 2012 Audi R8 Spyder. To start the car, insert the key into the ignition, release the handbrake, and press the brake pedal while putting the gearbox in neutral to power up the instrument cluster.

Then start the engine and engage first gear by pressing the clutch and accelerator pedals; release the clutch pedal, change to second gear, and pull away. If the engine does not start, check the starter motor.


Posted on 26 May 2026 by ScegliAuto


Related tutorials

How to replace the steering wheel of the Audi R8 Spyder
How to replace the steering wheel of the Audi R8 Spyder
Audi R8 Spyder (2015-2024 / Type4s) The instructions provided in this guide will show us the procedure for disassembling and replacing the steering wheel of the Audi R8 Spyder. First, i…
How to Open the Engine Compartment of the Audi R8 Spyder
How to Open the Engine Compartment of the Audi R8 Spyder
Audi R8 Spyder (2015-2024 / Type4s) Let’s see how to open the engine compartment of the Audi R8 Spyder, as the opening mechanism is somewhat hidden: sit in the driver's seat; at the bot…
How to manually close the roof of an Audi R8 Spyder.
How to manually close the roof of an Audi R8 Spyder.
Audi R8 Spyder (2015-2024 / Type4s) The manual closing procedure for the roof of an Audi R8 Spyder is very complex and always requires two people. It should only be done in case of a hy…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos