|
Do it yourself
| |||
| ||||
How to Replace the Starter Motor on an Audi A4
Model: Audi A4
B7
- Years 2004-2008
The starter motor on the Audi A4 B7 is hidden under the intake manifold, near the steering box. This job is quite uncomfortable and requires working in tight spaces and removing several components. Disconnect the battery and lift the car. Start by removing the air filter and its housing, disconnect and move the right front headlight assembly, disconnect the MAF connector, and loosen the intake manifold. From underneath, locate the starter motor, which is secured to the engine block with 2 to 3 long bolts; disconnect the electrical cables, remove the mounting bolts, and take the starter motor out of its place: it is heavy and bulky, and you will need to rotate it to pass it through the space you created. Clean the seat on the engine block and install the new starter motor, which you can find on eBay with the code 267186688058 for $53.74 plus $15.00 for shipping. Tighten the mounting bolts and reassemble everything in reverse order: manifold, hoses, headlight, air filter, fender, and wheel. Reconnect the battery and perform a functionality test.
Posted on 18 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Audi A4
(2000-2004 /
B6)
Below we will see the main instructions on how to disassemble and replace the starter motor of the Audi A4 1.8T. First, we raise the vehicle to acces…
Audi A4
(2000-2004 /
B6)
Today's guide will show us the procedure for disassembling and replacing the starter motor of the Audi A4 1.8T. First, we lift the car and locate the…
Audi A4
(2004-2008 /
B7)
Today we will explain how to replace the starter motor of a 2007 Audi A4 on your own in a simple and fast way. To replace the starter motor, we need …
Other guides you may be interested in
|
How to Repair the Key Spring of the Peugeot 207?
Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.490
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |