Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor of the Audi A4 1.8T

Model: Audi A4 B6 - Years 2000-2004
Part: Starter motor

Below we will see the main instructions on how to disassemble and replace the starter motor of the Audi A4 1.8T. First, we raise the vehicle to access the starter motor, first unscrewing the bolt of the bracket that holds the pressurized fluid lines (to lower them); then we unscrew the mounting bolts of the starter motor, disconnecting the power electrical connector to remove it, as shown in the video. At this point, we perform the repair or replacement of the starter motor, installing the new original one.

Posted on 18 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the starter motor of the 2007 Audi A4
How to replace the starter motor of the 2007 Audi A4
Audi A4 (2004-2008 / B7) Today we will explain how to replace the starter motor of a 2007 Audi A4 on your own in a simple and fast way. To replace the starter motor, we need …
Replacing the Starter Motor on Audi A4
Replacing the Starter Motor on Audi A4
Audi A4 (2004-2008 / B7) Is your car having trouble starting? Let's see how to replace the damaged starter motor on an Audi A4. Unlock the hood: lift it and secure it. Locate…
How to replace the starter motor of the Audi A4 1.8T
Audi A4 (2000-2004 / B6) Today's guide will show us the procedure for disassembling and replacing the starter motor of the Audi A4 1.8T. First, we lift the car and locate the…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos