Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor of the Audi A4 1.8T

Model: Audi A4 B6 - Years 2000-2004
Part: Starter motor

Today's guide will show us the procedure for disassembling and replacing the starter motor of the Audi A4 1.8T. First, we lift the car and locate the starter motor; then we unscrew its fixing screws and disconnect the electrical wiring to remove it, as shown in the video. At this point, we carry out the repair or directly replace the starter motor with the new one, fixing it properly and connecting the wiring; finally, we check the correct ignition of the engine, following the video tutorial until the end!

Posted on 25 April 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the starter motor of the Audi A4 1.8T
How to replace the starter motor of the Audi A4 1.8T
Audi A4 (2000-2004 / B6) Below we will see the main instructions on how to disassemble and replace the starter motor of the Audi A4 1.8T. First, we raise the vehicle to acces…
How to replace the starter motor of the 2007 Audi A4
How to replace the starter motor of the 2007 Audi A4
Audi A4 (2004-2008 / B7) Today we will explain how to replace the starter motor of a 2007 Audi A4 on your own in a simple and fast way. To replace the starter motor, we need …
Replacing the Starter Motor on Audi A4
Replacing the Starter Motor on Audi A4
Audi A4 (2004-2008 / B7) Is your car having trouble starting? Let's see how to replace the damaged starter motor on an Audi A4. Unlock the hood: lift it and secure it. Locate…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos