Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on Audi A4

Model: Audi A4 B7 - Years 2004-2008
Part: Starter motor

Is your car having trouble starting? Let's see how to replace the damaged starter motor on an Audi A4. Unlock the hood: lift it and secure it. Locate the starter motor under the electrical cables. Disconnect the battery terminals, then disconnect the starter motor power terminals using pliers or a screwdriver, unscrew the securing bolts of the starter motor with a socket wrench, and remove it from the engine bay. Install the new starter motor with the power cables and the associated securing screws. Finally, reconnect the battery terminals.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the starter motor of the Audi A4 1.8T
Audi A4 (2000-2004 / B6) Today's guide will show us the procedure for disassembling and replacing the starter motor of the Audi A4 1.8T. First, we lift the car and locate the…
How to replace the starter motor of the Audi A4 1.8T
How to replace the starter motor of the Audi A4 1.8T
Audi A4 (2000-2004 / B6) Below we will see the main instructions on how to disassemble and replace the starter motor of the Audi A4 1.8T. First, we raise the vehicle to acces…
Replacing the Starter Motor on the Audi A4 1.9 TDI - 2.0 TDI
Replacing the Starter Motor on the Audi A4 1.9 TDI - 2.0 TDI
Audi A4 (2004-2008 / B7) In this guide, you will discover the steps to remove and replace the starter motor on the Audi A4, both with 1.9 and 2.0 TDI engines. First, lift the…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos