Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A2
  6. : How to replace the power window switch panel of the Audi A2.

Audi A2 - Video tutorial

Model: Audi A2 MK 1 - Years 1999-2005
Part: Window lift switch
Operation: How to replace the power window switch panel of the Audi A2.

Below we will see the steps that will allow us to disassemble and replace the power window switch of the Audi A2, following the instructions below. First, we open the front door and start removing the door panel by unscrewing all the fixing screws and levering on the sides; then we disconnect the electrical connector of the power window switch, as shown in the video. At this point, we release the switch from the panel to remove it, replacing either the individual fuse or the entire power window switch; we apply the reverse procedure for reassembly!


Posted on 28 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos