Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A2
    4. : Replacing the remote control battery of the Audi A2

Audi A2 - Video tutorial

Model: Audi A2 MK 1 - Years 1999-2005
Part: Battery
Operation: Replacing the remote control battery of the Audi A2

Let's find out in this short and simple guide how to remove and replace the remote control battery of the Audi A2 key, following the instructions below. First of all we take our remote control in hand and we go to remove the plastic cover that we find on the back of the body, in order to access the battery compartment; to do this we pry something thin, like a flat screwdriver. At this point we remove and replace the battery with the new one, of the right model (in this case a 3V CR 2032); let's insert it in the correct direction and mount the lid!


Posted on 10 April 2024 by ScegliAuto



How do you replace the battery in the Audi A2?
Audi A2 (1999-2005 / MK 1) To be able to replace the battery of the Audi A2 you have to go and lift the tailgate, so that you can access the trunk. Here you can lift the carpet
How to remove the battery on Audi A2
Audi A2 (1999-2005 / MK 1) Car battery damaged? Let's see the replacement. On our Audi A2 the battery is placed in the rear trunk. We open the luggage compartment, remove the t
How do you replace the battery of the Audi A2?
Audi A2 (1999-2005 / MK 1) The replacement of the battery of the Audi A2 can be done by opening the rear door, so that the components located inside the trunk can be accessed:

    Frequently Asked Questions

    • A2 1999-2005 - Where is the Audi A2 battery located? Read Answer
    • A2 1999-2005 - Where is the battery located on Audi A2? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos