Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
MK 2, 8P
- Years 2003-2013 In this video, we see how to reset the service indicator on an Audi A3 8p version from 2008. First, we need to get into the car, close the doors, and insert the key into the ignition. We will need to pull the button/wheel located at the bottom left of the speedometer dial. We turn on the ignition and the display will show us when the service needs to be done. We continue to pull the button towards us until the mileage and time interval are reset. This way, the reset has already been done, but we can confirm it by turning off the ignition and then turning it back on to check the instrument cluster: now, when we pull the button, it will give us the new interval with an appropriate mileage and time interval for the next service.
Posted on 28 September 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.071
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |