Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box of an Audi A1

Model: Audi A1 8X, MK 1 - Years 2010-2018
Part: Fuse box

This brief video guide shows the location of the fuse boxes in our first-generation Audi A1, produced from 2010 to 2018. The first fuse box can be found inside the vehicle's cabin, specifically on the right side of the dashboard behind a plastic panel that can be removed with a lever. The second fuse box is located on the left side of the dashboard, also behind a removable plastic panel. The guide also shows all the relevant fuse and relay diagrams.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Audi A1 located?
Where is the fuse box of the Audi A1 located?
Audi A1 (2010-2018 / 8X, MK 1) The Audi A1 model 8x has two fuse boxes located respectively inside the engine compartment and inside the passenger compartment. The first fuse box l…
Where are the fuses of the Audi A1 located?
Audi A1 (2010-2018 / 8X, MK 1) The fuse boxes of the Audi A1 are responsible for containing the fuses that regulate the operation of the devices installed inside the vehicle. In th…
Fuse box layout and positioning of the Audi A1.
Fuse box layout and positioning of the Audi A1.
Audi A1 (2018-2025 / MK 2, GB) Today we discover the guide on how to identify the fuse scheme and diagram of the Audi A1, following the instructions below. First, we open the front…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos