Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gas springs on the Audi A6.

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Checks and maintenance

Today with the help of this short video tutorial, we will explain how to replace the gas springs of the Audi A6, model C6. First, open the rear door and detach the ring that connects the gas support strut to the hood, using a flat screwdriver, then detach the ring connected to the belt. Remove the support strut and install a new one. At this point, start the reassembly process of the previously disconnected parts, such as the ring that connects the strut to the body and the ring that connects the strut to the hood. Once you have completed these operations, you can close the hood.

Posted on 31 January 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service light on the Audi A6 C8
Resetting the Service light on the Audi A6 C8
Audi A6 (2018-2026 / MK 5, C8) When the kilometers expected for the engine oil replacement are reached, a warning message appears on the display in the center of the Audi A6 instru…
How to reset the service on an Audi A6 C6
How to reset the service on an Audi A6 C6
Audi A6 (2004-2012 / MK 3, C6) In this video, we see how to reset the service of the 2005 Audi A6, specifically the C6 version. On this version, it is not possible to perform a man…
How do you disassemble the rearview mirror of the Audi A6 C7?
How do you disassemble the rearview mirror of the Audi A6 C7?
Audi A6 (2011-2018 / C7, MK 4) The reasons for disassembling the rearview mirror of a car, focusing here on the external one, are various, but undoubtedly one of the most likely is…

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos