Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light from an Audi A3?

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part:

See other generations:
Video tutorial

Removing the third brake light, located at the top of the tailgate, is fairly straightforward but requires care not to damage the pressure clips of the internal plastic cover. To access the third brake light, you must first remove the central trim panel and then take off the side and upper trim panels.

This involves extracting the anchoring tabs from their respective slots. Once you reach the third brake light, unscrew the fixing screws, disconnect the connector, and remove it from its housing.

You can then proceed to replace the bulbs if necessary.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Replacing the Third Brake Light Bulbs on the Audi A3
Replacing the Third Brake Light Bulbs on the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) This short and simple guide will show you the main instructions on how to remove and replace the bulbs of the third brake light on the Audi A3. First…
How to Replace the Third Brake Light on the Audi A3
How to Replace the Third Brake Light on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this mini guide, you will learn how to quickly and correctly replace the third brake light on your Audi A3. First, completely switch off the car a…
How to Remove the Third Brake Light on the Audi A3?
How to Remove the Third Brake Light on the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In this tutorial, we will see how to remove the third brake light on the Audi A3, useful if you need to replace a faulty bulb. This is a very simple …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos