Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A4
    4. : How to pair the key of an Audi A4 B6/B7 with the vehicle

Audi A4 - Video tutorial

Model: Audi A4 B7 - Years 2004-2008
Part: Key
Operation: How to pair the key of an Audi A4 B6/B7 with the vehicle

In this video we can see how to associate the key of an Audi B6 or B7 to the car (the procedure is the same for both versions); in this case it was necessary to re-initialize the remote control, which had remained with a low battery for too long, and therefore had "reset". We must insert the key into the ignition, turn it to the on position and leave it on for about ten seconds; simultaneously press the lock buttons on the door and on the key. Wait ten seconds, turn off the ignition and check that the remote control works again.


Posted on 4 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • A4 2004-2008 - Why is the Audi A4 remote control not working? Read Answer
    • A4 2000-2004 - What does it mean if the Audi A4 remote control no longer works? Read Answer
    • A4 2004-2008 - Why does the Audi A4 key not work? Read Answer
    • A4 2014-2023 - Why does the remote control no longer work in the Audi A4? Read Answer
    • A4 2004-2008 - Why does the Audi A4 remote control not work? Read Answer
    • A4 2007-2016 - Why does the central locking of the Audi A4 not work? Read Answer
    • A4 2004-2008 - How to unlock the tailgate of the Audi A4 if it does not open? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos