Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A4
    4. : Where is the Comfort system control module located in the Audi A4?

Audi A4 - Video tutorial

Model: Audi A4 B7 - Years 2004-2008
Part: Control unit
Operation: Where is the Comfort system control module located in the Audi A4?

In this video we can see where the Comfort system control module is located in the Audi A4 and how to proceed in case we need to replace it. As shown, the control unit in question is located inside the passenger compartment, specifically under the floor mat on the driver's side. To remove it, first open the door, then unclip the lower plastic cover, unscrew the two fixing bolts, and disconnect the five connectors. To install the replacement, simply follow the reverse procedure, making sure that the key is not inserted.


Posted on 25 April 2024 by ScegliAuto

    Frequently Asked Questions

    • A4 2014-2023 - Where is the Audi A4 engine control unit located? Read Answer
    • A4 2004-2008 - Where is the ECU of the 2005 Audi A4? Read Answer
    • A4 2007-2016 - Where is the handbrake control unit of an Audi A4 located? Read Answer
    • A4 2007-2016 - Where is the ECU of an Audi A4 located? Read Answer
    • A4 2007-2016 - Where is the Audi A4 central locking control unit located? Read Answer
    • A4 2014-2023 - Yellow warning light with triangle and exclamation mark on Audi A4? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos