Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A6
  6. : Arms replacement and maintenance

Audi A6 - Video tutorial

Model: Audi A6 C4, MK 1 - Years 1994-1997
Part: Arm
Operation: Arms replacement and maintenance

This is a simple operation that you can do yourself by following this simple guide. As a first step, remove the wheel in question, then through the jack supplied lift your car and place it safely on the special pedestals, now you can remove the bolt indicated on the rear part of the disc, in this way you will detach the lower part of the connected arm. to the hub, now you will have to extract the disassembled part in order to obviously install the new piece, then retrace the steps described backwards for the reassembly of the various components used. And that's it!


Posted on 25 September 2023 by ScegliAuto

    Frequently Asked Questions

    • A6 2011-2018 - How much do the front wishbones of the Audi A6 4G cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos