Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the upper suspension arms of the Audi A6

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Control arm

Today's step-by-step instructions will show us how to disassemble and replace the upper suspension arms of the Audi A6. First, we lift the car and start by removing the front wheel; then we use a star wrench and a socket wrench to unscrew the upper pin of the arm, then unscrew the pin of the movable part to detach and remove the arm from the suspension, as shown in the video. At this point, we install the new original arm, securing it properly; we will also replace the other arm in the same way!

Posted on 24 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Audi A6 (1997-2004 / MK 2, C5) The necessary tools are a ratchet wrench, a set of open-end wrenches, and replacement arms. Lift the car on a lift and remove the wheel to access the…
Audi A6 (1997-2004 / MK 2, C5) To replace the control arms of the suspension, remove the shock absorber, lift the vehicle on a hydraulic lift, and remove the wheel corresponding to…
Audi A6 (1997-2004 / MK 2, C5) Lift the vehicle on a lift and first remove the bolt securing the stabilizer bar to the suspension control arm. Then remove the nut from the ball joi…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos