Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear seats of the Audi A6?

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Seat

In order to remove the rear seats of the Audi A6, you need to loosen the screws located in the lower front part of the seat: once these screws have all been properly loosened, it will be possible to completely remove the rear seat bench, so that the screws fixing the backrests are accessible. These screws must be loosened properly, so that they can be detached from their housing by lowering the levers near the headrests. Once the old backrests have been completely removed, the new ones can be inserted, making sure that everything is functioning properly.

Posted on 15 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove Seat Belts on Audi A6
How to Remove Seat Belts on Audi A6
Audi A6 (1997-2004 / MK 2, C5) How to remove the seat belts on an Audi A6? Let's see how to remove the rear seat belts. To remove the rear seat belts, you need to take out the rear…
Removing Rear Seat Belts on A6
Removing Rear Seat Belts on A6
Audi A6 (1997-2004 / MK 2, C5) Let's see how to remove the rear seat belts on the Audi A6. To remove the rear seat belts, you need to take out the rear seats to access the mounting…
How to Replace the Diesel Fuel Pump on an Audi A6?
How to Replace the Diesel Fuel Pump on an Audi A6?
Audi A6 (1997-2004 / MK 2, C5) To replace the diesel fuel pump on an Audi A6, first disconnect the battery and remove the rear seats. To remove the seats, lift from the center of e…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos