Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Handbrake Lever Cover on the Audi A3?

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Parking brake

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the handbrake lever cover on the Audi A3, a very simple and quick operation. First, enter the cabin and locate the slot at the back of the cover.

Insert a small flat-head screwdriver into the slot and, using leverage, detach the cover. Next, grasp the cover, pull it outwards, and separate it from the lever.

Finally, remove the release button if necessary, position all the replacements, and reassemble everything by simply following the reverse procedure.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Cover of the Driver's Seat in an Audi A3?
How to Remove the Rear Cover of the Driver's Seat in an Audi A3?
Audi A3 (2020-2026 / MK 4, 8Y) To remove the rear cover of the driver's seat in your Audi A3, proceed carefully. After opening the rear door on the driver's side, examine the cover…
How to Replace the Armrest Cover of an Audi A3
How to Replace the Armrest Cover of an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today, you will learn how to replace the armrest cover of an Audi A3 model 8P simply and quickly. First, obtain a new cover; the replacement cover ca…
How to Replace the Third Brake Light Bulb on the Audi A3?
How to Replace the Third Brake Light Bulb on the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) To replace the third brake light bulb on the Audi A3, open the boot to access the inside of the rear hatch. Here, you will need to unscrew the two sc…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos