Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Audi A4

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Headlight bulb

See other generations:
Video tutorial

The first step is to release the hood using the lever and lift it up. Next, unscrew the bolts that secure the top edge of the bumper and the air intake to the engine. This will give you access to the back of the headlight where some bolts are located that hold it in place, in addition to those positioned at the top of the headlight.

Once you have removed the mentioned bolts, you can pull out the headlight and disconnect the connectors at the back. This way, you can work directly on the headlight and replace the burnt-out bulbs, and you're done!


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb on an Audi A4
Replacing the Headlight Bulb on an Audi A4
Audi A4 (2007-2016 / B8) Follow this guide to remove and replace the xenon headlight bulb on your Audi A4. First, open the hood of your car and start unscrewing the screws se…
How to replace the headlight bulb of the Audi A4
How to replace the headlight bulb of the Audi A4
Audi A4 (2004-2008 / B7) To replace the rear headlight bulb of an Audi A4 model b7, we need to: - open the trunk; - unscrew the screw located on the inside, towards the headl…
How to Replace the Headlight Bulb on an Audi A4
How to Replace the Headlight Bulb on an Audi A4
Audi A4 (2000-2004 / B6) In a few simple steps, discover how to replace the low beam headlight bulb on an Audi A4. First, open the hood of the vehicle and disconnect the elec…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos