Do it yourself
Frequently asked questions about cars and motorcycles

How to Open a Stuck Trunk on an Audi A4?

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

On the Audi A4, the trunk may get stuck due to a malfunction of the control button or the lock actuator. In these cases, you can still open the trunk by following the simple procedure shown in this tutorial.

First, open the rear doors, then lower the seat backs by operating the respective lever. Next, go inside the trunk, remove the indicated plastic cover, and using a flathead screwdriver, manually unlock the latch.

At this point, the trunk will be free to open and can be repaired if necessary.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

Audi A4 (2007-2016 / B8) Opening and closing the trunk of a 2015 Audi A4 from the inside is an easy and quick task to do on your own. To open the trunk, do the following: -Ge…
Audi A4 (2007-2016 / B8) In this video, you will see how to manually unlock the trunk of an Audi A4 when the remote battery is dead: in the B8 version of this vehicle, the re…
Audi A4 (2007-2016 / B8) Today's main steps will show you how to manually open the rear trunk lid of the Audi A4 in case of an emergency. First, open the rear doors and start…

    Frequently Asked Questions

    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos