Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the ventilation nozzles of the Audi A3

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Air vents

Today's steps will show us how to disassemble and replace the ventilation nozzles of the Audi A3, following the instructions below. First, we climb aboard the cabin and start using a very thin plastic lever to remove the ventilation nozzle from the dashboard, without damaging the internal components; protect the side parts if necessary, as shown in the video. In the same way, we will replace all the other ventilation nozzles on the dashboard if necessary, performing either the repair of the fins, following the video tutorial until the end!

Posted on 14 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the ventilation nozzles of the Audi A3?
How do you replace the ventilation nozzles of the Audi A3?
Audi A3 (2012-2019 / MK 3, 8V) In order to replace the ventilation nozzles of the Audi A3, you will need to use a tool to pry them out of their housing. Once the internal fixing cl…
How do you replace the central display of the Audi A3?
How do you replace the central display of the Audi A3?
Audi A3 (2012-2019 / MK 3, 8V) In order to replace the central display of the Audi A3, you need to use an object to lever and detach the ventilation grilles from inside its housing…
Disassembly of the ventilation nozzles of the Audi A3
Disassembly of the ventilation nozzles of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Below we will see the main instructions that will allow us to disassemble the ventilation nozzles or air diffusers of the dashboard of the Audi A3. F…

How to Replace the Boot Compartment Light Bulb on a Peugeot 208

If you want to improve visibility inside the boot compartment, it is recommended to replace the original incandescent bulb with a LED type (T10 fitting); once the rear hatch is opened, locate the bulb holder positioned on the side, near the shock absorber dome, where the plastic grille is located. Then, lever the retaining tab to extract the bulb holder, disconnect the power connector, and remove the old bulb to replace it with the LED one; reconnect the power, check the correct operation of the bulb (if not, rotate it 180°), and reposition the bulb holder in its place.

Watch the video!


by ScegliAuto

More videos