|
Do it yourself
| |||
| ||||
|
Model: Benelli Trk 502x
These brief and simple steps will illustrate the procedure for replacing the engine coolant of the Benelli TRK 502X motorcycle. First, we put the motorcycle on the stand and begin to disconnect the lower coolant hose, located at the bottom left; let the fluid drain into a container for about ten minutes, as shown in the video. At this point, we unscrew the radiator cap, then top up with the new antifreeze (with the appropriate characteristics); we fill it up until we reach the maximum level.
Posted on 13 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Trk 502x
This guide shows how to install additional lights on the Benelli TRK 502X in simple and quick steps. First, place the motorcycle on a stand and prepa…
Trk 502x
The instructions in this guide will show you how to install additional lights on the Benelli TRK 502X motorcycle. First, place the bike on the centre…
Trk 502x
In this tutorial, we can see how to replace the engine oil in the Benelli TRK 502X, an extremely simple and quick operation. First of all, make sure …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |